Dating tombac buttons

It was often used in Realistic's, which were made to resemble natural materials such as wood, metal, ivory and glass. heres just a very small fraction of the total number i've dug up in the last dozen years at colonial sites. Vegetable Ivory- or Tagua Nut from the Corozo Palm This nut comes from the Corozo Palm that grows in South America. These pieces are light silver in color, the metals is very soft and will not tarnish. Some brass and copper buttons had a painted on colored surface that will come off with water. Bakelite is a very heavy plastic in comparison to celluloid. CC- If the design of the button is not painted on, the button can be gently cleaned in a mild solution of hand soap and water. It can be heated and pressed into a mold; carved and inlayed with other materials. The MOP is easily identified with the white shell with pink AB of almost rainbow colors. The dark colors of this people led to deep burgundies, purples and blues.

Sterling, yellow bronze and brass buttons can also be found. CC- Try rubbing with a soft cloth or an old toothbrush to clean and polish the surface. These pieces came in a variety of styles and colors. CC- if these buttons are one- piece they can be cleaned with water and dried quickly. Do not use water on any of these buttons. Dating a hasbian. CC- to clean all of these types of metal buttons try using a kneaded gray art eraser or rub with a soft cloth to clean. The buttons were made as sew through, metal shank or self shank- these being from the Troca shell. CC- To clean try rubbing with a soft cloth or an old toothbrush to clean and polish the surface. Pewter is very popular and can be finished to resemble other metals. The buttons were decorated by a transfer pattern much like china plates and cups. Most of this type of button had rhinestones or plastic decorations.

Military Uniform and Civilian Buttons -

. Celluloid is very lightweight and easily cracks because it was a thinner plastic than Bakelite. New metal buttons can be found in a variety of metals and from all around the world. Celluloid can be tinted and then molded or painted after the object is molded. Over washing and drying in the dryer can damage and chip the shell that is made in layers. They can be found in their natural state carved, mixed with other materials such as metal and rhinestones; they can be dyed, or painted with images. Try rubbing with a soft cloth to clean and polish the surface. Some metal buttons also had an enamel finish such as cloisonné or champleve or guilloche. The shanks were usually made from brass, and tarnishing is usually not an issue with glass buttons. Dating tombac buttons. A forum member here once mentioned that tombac is the material. Hand painted and dyed buttons should not be washed. It had a major flaw in that fact it was highly flammable. Unlike Bakelite the Lucite does not discolor through time. Many of these buttons were intaglio-carved in relief and set into a darker color or painted from behind.

England Metal Detecting Tours - Tudor, Stuart, Georgian.

. CC- Try rubbing with a soft cloth to polish the surface. Other shell buttons were made from abalone; green, brown and peach muscle; Tahiti shell and others. The colors tend to be opaque rather than transparent. tombac or not,the curator of the historical society here identified it as a colonial button. Clear Bakelite will discolor over time. Metal buttons that are two-part may have cardboard in between the layers of metal. It could be molded, stamped, machine tooled, hollow blown and more. __________________ Just for one moment I heard somebody call.Looked beyond the day in hand.Theres nothing there at all. The dyes tend to be naturals hues of brown, tan black and green/ the dye only absorbs on the surface layer, so the carving is left as the natural color of the nut. sample of vintage metal buttons sample of vintage metal picture buttons sample of new Pewter from Norway, and vintage nickel Strawberry button. CC- Try rubbing gently with a soft cloth to clean and polish the surface. i hope your hospital stay isn't serious and your out very soon , i'll be looking toward your pictures until then. The colors take on a soft natural hue. This type of button can hold its beauty through time because the color of the glass does not fade or discolor. Keep in mind that too much water and abrasion can remove the nacre on the surface of the button. If this does not remove the dirt try washing them with a toothbrush dipped in a mild solution of hand soap. It is a hard, versatile nut that can be carved and dyed. Some pieces have other woods inlayed as well as shell, metal and bone/ CC- Try gently rubbing with a soft cloth to clean and polish the surface. During WWII when metals were scarce a nickel composition was used. These buttons were made in lively colors with additional painting on the surface of the button. Otherwise try rubbing with a soft cloth or an old toothbrush to clean and polish the surface. These buttons were made from a variety of pure metals and alloys. Do not use any chemicals on this substance, for they will slowly melt through the surface. The designs range from "calicoes" at the top to "stencils" at the bottom. They ranged from fanciful creations to imitations of other materials such as wood and ivory.

27.5 mm Fancy Border Tombac Button - …

. The shank can be sew-through style, molded or inserted metal shank. The nacre that is important to the pearl is to the shell button as well. Natural horn and carved horn can be found currently today. some uncleaned and some cleaned. Shell buttons are still a favorite by designers today and can be found carved by hand or laser; hand painted and or dyed; mixed with metals and other materials. They were made for men shirts, women's dresses, and underwear. sample of vintage and new Mother of Pearl: MOP buttons sample of vintage and new Mother of Pearl: MOP buttons Mother of Pearl-MOP These are probably the most common of the vintage buttons, not only because of their beauty but the availability as well. The rhinestones may have to be re-glued because glue shrinks with time. Many types of wood have been used. China Buttons and Transfer Buttons These china buttons were made for the working class as a mainstay and used on sturdy dependable clothing. CC- To clean these first try buffing them with a terry cloth towel. CC- Try gently rubbing with a soft cloth to clean and polish the surface.. The plastic itself is colored. Wood has been used probably as long as buttons have been needed. These buttons all have holes to stitch onto the fabric with. New buttons are being made again in Czechoslovakia using old molds in new and different colors. Due to it’s porous nature it can be dyed as well. Dating tombac buttons. Though you may find an occasional sterling, gold or pewter button, most metal buttons were made from brass and copper